Born2Bond
UV-Acrylic LC Series

High performance UV-curable adhesives

Highly durable, transparent when cured, and easy to manage, the Born2Bond UV-Acrylic LC Series can be used with metals, glass and plastics, including ABS and PMMA. Curing only happens on exposure to UV – enabling ‘cure on demand’ within the production process and supporting with increased throughput. This can be achieved within a wide range of UV wavelengths (between 365 and 405nm), resulting in safer curing processes and maximizing compatibility with existing UV curing lamps.

Born2Bond UV-Acrylic LC products are non-toxic, solvent-free, and can be dispensed using a wide variety of equipment and methods. Patented Nanostrength® technology developed by Bostik’s parent company, Arkema, ensures greater impact resistance and elongation properties while gap filling, low shrinkage and non-cracking properties further enhance performance. This is supported by a low exothermic reaction during formation which reduces the risk of mechanical stress that could otherwise damage the substrates.


Long Lasting

No Cracks

Transparent

UV Resistant

特性

  • 易于使用
  • 固定时间:10秒*
  • 高粘接强度
  • 开放时间长
  • 低气味、低白化
  • 相较传统瞬干胶而言更不易碎
  • 可粘接多种材料**,包括聚苯乙烯
  • 透明且易于使用
  • 双重固化配方:即时固化和光固化

典型应用

  • Luxury goods (e.g. perfume and cosmetics packaging, jewelry, watches)
  • Electronics (e.g. PCB assembly, coating, encapsulation)
  • Automotive (e.g. ADAS)
  • General assembly (e.g. plastic and glass parts bonding)

Available in selected regions only.
涂装胶粘剂时,务必佩戴眼镜和手套。

产品规格

LC176 LC177
VISCOSITY (mPa.s) 110,000 to 150,000 110,000 to 150,000
ELONGATION (%) 220 to 260 200 to 220
TENSILE STRENGTH (MPa) 9 to 11
LAP SHEAR STRENGTH ON PMMA (MPa) 7
HARDNESS (SHORE) 60 to 75 A 20 to 35 D
WATER ABSORPTION (%) 1.5 1
FIXTURE TIME (s) LED 405 nm (2 W/cm2*) 4 5
FIXTURE TIME (s) UVA lamp
(55-60 mW/cm2*)
7 9
MATERIALS PMMA, ABS, Aluminum, Stainless Steel, Glass

* Measured xxxx

索取样品

若您有意收到任何 Born2Bond产品的样品,请填写下面的表格并选择最多三种您希望获得样品的产品。