High performance UV-curable adhesives
Highly durable, transparent when cured, and easy to manage, the Born2Bond™ UV-Acrylic LC Series can be used with metals, glass and plastics, including ABS and PMMA. Curing only happens on exposure to UV – enabling ‘cure on demand’ within the production process and supporting with increased throughput. This can be achieved within a wide range of UV wavelengths (between 365 and 405nm), resulting in safer curing processes and maximizing compatibility with existing UV curing lamps.
Born2Bond™ UV-Acrylic LC products are non-toxic, solvent-free, and can be dispensed using a wide variety of equipment and methods. Patented Nanostrength® technology developed by Bostik’s parent company, Arkema, ensures greater impact resistance and elongation properties while gap filling, low shrinkage and non-cracking properties further enhance performance. This is supported by a low exothermic reaction during formation which reduces the risk of mechanical stress that could otherwise damage the substrates.
一部の地域のみでご利用いただけます。
接着剤の使用時には、必ず保護メガネと手袋を着用してください
| LC176 | LC177 | |
|---|---|---|
| VISCOSITY (mPa.s) | Available in various viscosities |
|
| ELONGATION (%) | 170 to 180 | 170 to 180 |
| TENSILE STRENGTH (MPa) | 9 to 11 | |
| LAP SHEAR STRENGTH (MPa)* | 7 | |
| HARDNESS (SHORE) | 60 to 75 A | 20 to 35 D |
| WATER ABSORPTION (%) | 1.5 | 1 |
| FIXTURE TIME (s) LED 405 nm(1 W/cm2) ** | 5 |
4 |
| FIXTURE TIME (s) UVA lamp (55-60 mW/cm2) *** | 7 | 9 |
| MATERIALS | PMMA, ABS, Aluminum, Stainless Steel, Glass | |
* On PMMA
** Measured with UV Meter UE 520
*** Measured with UVX radiometer
Born2Bond™ 製品のサンプルを希望される場合は、以下のフォームに必要事項を入力し、最大3つの製品を選択してください。お客様のご要望をお伺いするため、担当者よりご連絡させていただきます.
