Born2Bond
UV-Acrylic LC Series

High performance UV-curable adhesives

Highly durable, transparent when cured, and easy to manage, the Born2Bond UV-Acrylic LC Series can be used with metals, glass and plastics, including ABS and PMMA. Curing only happens on exposure to UV – enabling ‘cure on demand’ within the production process and supporting with increased throughput. This can be achieved within a wide range of UV wavelengths (between 365 and 405nm), resulting in safer curing processes and maximizing compatibility with existing UV curing lamps.

Born2Bond UV-Acrylic LC products are non-toxic, solvent-free, and can be dispensed using a wide variety of equipment and methods. Patented Nanostrength® technology developed by Bostik’s parent company, Arkema, ensures greater impact resistance and elongation properties while gap filling, low shrinkage and non-cracking properties further enhance performance. This is supported by a low exothermic reaction during formation which reduces the risk of mechanical stress that could otherwise damage the substrates.


Long Lasting

No Cracks

Transparent

UV Resistant

CARACTERÍSTICAS

  • Fácil de usar
  • Tiempo de fijación: 10 segundos*
  • Alta resistencia a la adhesión
  • Tiempo de apertura prolongado
  • Poco olor, poca floración
  • Menos frágil que los adhesivos instantáneos convencionales
  • Adhiere una amplia gama de materiales**, incluido el poliestireno
  • Transparente y fácil de usar
  • Formulación de doble curado: instantáneo y curado por luz UV

APLICACIONES HABITUALES

  • Luxury goods (e.g. perfume and cosmetics packaging, jewelry, watches)
  • Electronics (e.g. PCB assembly, coating, encapsulation)
  • Automotive (e.g. ADAS)
  • General assembly (e.g. plastic and glass parts bonding)

Available in selected regions only.
Lleve siempre gafas y guantes cuando aplique adhesivos

Especificaciones del producto

LC176 LC177
VISCOSITY (mPa.s) 110,000 to 150,000 110,000 to 150,000
ELONGATION (%) 220 to 260 200 to 220
TENSILE STRENGTH (MPa) 9 to 11
LAP SHEAR STRENGTH ON PMMA (MPa) 7
HARDNESS (SHORE) 60 to 75 A 20 to 35 D
WATER ABSORPTION (%) 1.5 1
FIXTURE TIME (s) LED 405 nm (2 W/cm2*) 4 5
FIXTURE TIME (s) UVA lamp
(55-60 mW/cm2*)
7 9
MATERIALS PMMA, ABS, Aluminum, Stainless Steel, Glass

* Measured xxxx

Descargas en inglés

SOLICITE MUESTRAS

Si desea recibir una muestra de alguno de los productos Born2Bond, rellene el siguiente formulario y elija hasta un máximo de tres productos.