Born2Bond
UV-Acrylic LC Series

High performance UV-curable adhesives

UV-Acrylic LC Series

Highly durable, transparent when cured, and easy to manage, the Born2Bond UV-Acrylic LC Series can be used with metals, glass and plastics, including ABS and PMMA. Curing only happens on exposure to UV – enabling ‘cure on demand’ within the production process and supporting with increased throughput. This can be achieved within a wide range of UV wavelengths (between 365 and 405nm), resulting in safer curing processes and maximizing compatibility with existing UV curing lamps.

Born2Bond UV-Acrylic LC products are non-toxic, solvent-free, and can be dispensed using a wide variety of equipment and methods. Patented Nanostrength® technology developed by Bostik’s parent company, Arkema, ensures greater impact resistance and elongation properties while gap filling, low shrinkage and non-cracking properties further enhance performance. This is supported by a low exothermic reaction during formation which reduces the risk of mechanical stress that could otherwise damage the substrates.

Duración icon
Duración
Sem Rachaduras icon
Sem Rachaduras
Transparente icon
Transparente
Resistente aos raios UV icon
Resistente aos raios UV

CARACTERÍSTICAS

  • Prevenção da corrosão
  • Várias opções de viscosidades e resistências
  • Componente único
  • Adequado para metais ativos e passivos
  • Várias opções de viscosidades e resistências
  • Adequado para metais ativos e passivos
  • 100% de conexão – sem soltar
  • Resistência à vibração
  • Prevenção da corrosão

APLICAÇÕES TÍPICAS

  • Luxury goods (e.g. perfume and cosmetics packaging, jewelry, watches)
  • Electronics (e.g. PCB assembly, coating, encapsulation)
  • Automotive (e.g. ADAS)
  • Adesão de couro e borracha

Disponível apenas em regiões selecionadas.
Sempre use óculos e luvas de proteção durante a aplicação de adesivos

Especificação do produto

LC176 LC177
VISCOSITY (mPa.s) 110,000 to 150,000
ELONGATION (%) 220 to 260 200 to 220
TENSILE STRENGTH (MPa) 9 to 11
LAP SHEAR STRENGTH (MPa)* 7
HARDNESS (SHORE) 60 to 75 A 20 to 35 D
WATER ABSORPTION (%) 1.5 1
FIXTURE TIME (s) LED 405 nm(2 W/cm2) ** 4 5
FIXTURE TIME (s) UVA lamp (55-60 mW/cm2) *** 7 9
MATERIALS PMMA, ABS, Aluminum, Stainless Steel, Glass

* On PMMA
** Measured with UV Meter UE 520
*** Measured with UVX radiometer

SOLICITAR AMOSTRAS

Se tiver interesse em receber amostras dos produtos Born2Bond, preencha o formulário abaixo e escolha até três produtos que gostaria de testar. Um membro de nossa equipe entrará em contato para discutir com detalhes suas necessidades.