Born2Bond
UV-Acrylic LC Series

High performance UV-curable adhesives

Highly durable, transparent when cured, and easy to manage, the Born2Bond UV-Acrylic LC Series can be used with metals, glass and plastics, including ABS and PMMA. Curing only happens on exposure to UV – enabling ‘cure on demand’ within the production process and supporting with increased throughput. This can be achieved within a wide range of UV wavelengths (between 365 and 405nm), resulting in safer curing processes and maximizing compatibility with existing UV curing lamps.

Born2Bond UV-Acrylic LC products are non-toxic, solvent-free, and can be dispensed using a wide variety of equipment and methods. Patented Nanostrength® technology developed by Bostik’s parent company, Arkema, ensures greater impact resistance and elongation properties while gap filling, low shrinkage and non-cracking properties further enhance performance. This is supported by a low exothermic reaction during formation which reduces the risk of mechanical stress that could otherwise damage the substrates.


Long Lasting

No Cracks

Transparent

UV Resistant

CARACTÉRISTIQUES

  • Facile à utiliser
  • Temps de prise : 10 secondes*
  • Performance de collage élevée
  • Long temps ouvert
  • Peu odorant et Basse efflorescence
  • Moins friable que les adhésifs instantanés classiques
  • Adhère à une grande variété de matériaux** y compris le polystyrène
  • Transparent et facile à utiliser
  • Formule Dual Cure : durcissement instantané et photodurcissement

APPLICATIONS TYPES

  • Luxury goods (e.g. perfume and cosmetics packaging, jewelry, watches)
  • Electronics (e.g. PCB assembly, coating, encapsulation)
  • Automotive (e.g. ADAS)
  • General assembly (e.g. plastic and glass parts bonding)

Available in selected regions only.
Portez toujours des lunettes et des gants lorsque vous appliquez des adhésifs.

Spécifications produits

LC176 LC177
VISCOSITY (mPa.s) 110,000 to 150,000 110,000 to 150,000
ELONGATION (%) 220 to 260 200 to 220
TENSILE STRENGTH (MPa) 9 to 11
LAP SHEAR STRENGTH ON PMMA (MPa) 7
HARDNESS (SHORE) 60 to 75 A 20 to 35 D
WATER ABSORPTION (%) 1.5 1
FIXTURE TIME (s) LED 405 nm (2 W/cm2*) 4 5
FIXTURE TIME (s) UVA lamp
(55-60 mW/cm2*)
7 9
MATERIALS PMMA, ABS, Aluminum, Stainless Steel, Glass

* Measured xxxx

DEMANDEZ DES ÉCHANTILLONS

Si vous souhaitez recevoir des échantillons de produits Born2Bond, veuillez remplir le formulaire ci-dessous et choisir au maximum trois produits que vous aimeriez tester.